Conrad Boat Grizzly Manual

The Conrad Boat Grizzly is a rugged, all-purpose utility boat designed for durability and performance in various water conditions. Featuring a reinforced hull, efficient outboard motor compatibility, ample storage, and safety features, it is ideal for fishing, hunting, and general recreational use. Below are key sections covering safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Setup & Assembly 4. Specifications 5. Controls & Operation 6. Connecting Equipment 7. Maintenance & Storage 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Reinforced polyethylene hull, bench seating, storage compartments, motor mount, navigation lights, bilge pump, and safety rails.

Feature	Description
Hull Material	High-density polyethylene for impact resistance
Length	14 feet (standard model)
Capacity	4 persons or 900 lbs max
Motor Compatibility	Up to 25 HP outboard
Storage	Under-seat compartments and bow storage
Seating	Bench seats with padded options
Navigation Lights	Bow and stern lights for night operation
Bilge Pump	Manual/Auto pump for water removal
Safety Rails	Stainless steel rails on sides
Trailer Compatibility	Fits standard boat trailers

Safety Precautions

Always prioritize safety when operating the Conrad Boat Grizzly.

Wear a USCG-approved life jacket at all times.
Check weather conditions before departure.
Ensure bilge pump is operational.
Do not exceed weight capacity or person limit.
Keep fire extinguisher on board.

WARNING! Never operate under the influence of alcohol or drugs. Ensure all passengers are briefed on safety procedures.

Setup & Assembly

Unpack and inspect all parts. Assemble on a flat, stable surface.

Attach seats: Secure bench seats to mounting brackets using provided bolts.
Install motor: Mount outboard motor to transom, ensuring secure attachment.
Connect navigation lights: Wire to battery following color coding.
Test bilge pump: Connect to battery and test operation.
Load onto trailer: Use proper tie-downs to secure boat.

CAUTION! Use two people for lifting and assembly. Tighten all fasteners securely.

Specifications

Length: 14 ft (4.3 m)
Beam: 5 ft (1.5 m)
Weight: 250 lbs (113 kg) hull only
Capacity: 4 persons or 900 lbs (408 kg)
Max HP: 25 HP outboard
Hull Material: High-density polyethylene
Color Options: Olive Green, Camo, Gray
Included: Oarlocks, drain plug, basic hardware kit
Optional: Trolling motor mount, fish finder bracket, canopy

Controls & Operation

Basic controls include throttle, steering, and accessory switches.

Starting Procedure: Ensure motor is in neutral, prime fuel line, pull start or use key ignition. Steering: Use tiller handle or remote steering if equipped. Speed: Adjust throttle gradually; avoid sudden turns at high speed. Anchoring: Deploy anchor from bow cleat; ensure line is secure.

Accessories: Bilge pump switch (On/Auto/Off), navigation light switch, accessory power outlet.

Connecting Equipment

Common connections: Motor, battery, electronics, and trailer.

Motor: Attach to transom; connect fuel line and throttle cable.
Battery: Secure 12V battery in designated compartment; connect to motor and accessories.
Electronics: Install fish finder/GPS using mounting bracket; connect to power.
Trailer: Secure boat with transom straps and bow eye connection.

Tip: Use marine-grade connectors to prevent corrosion.

Maintenance & Storage

Regular maintenance ensures longevity and safe operation.

After each use: Rinse hull with fresh water; drain bilge area.
Monthly: Inspect hull for cracks; check fasteners for tightness.
Seasonally: Lubricate moving parts; inspect and charge battery.
Storage: Store in shaded, dry area; use boat cover if outdoors.

CAUTION! Do not use abrasive cleaners on hull. Always disconnect battery before storage.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Motor won't start	Fuel issue, spark plug	Check fuel level and line; inspect spark plug; ensure kill switch is attached.
Bilge pump not working	Power connection, clog	Check battery connection; clear debris from pump intake.
Hull taking on water	Crack, loose drain plug	Inspect hull for damage; ensure drain plug is tight.
Steering stiff	Corrosion, lack of lubrication	Lubricate steering linkage; check for obstructions.
Lights not working	Bulb, wiring, switch	Replace bulb; check wiring connections; test switch.

Emergency: Carry VHF radio or cell phone in waterproof case.

Warranty & Support

Conrad Boat Grizzly includes a 3-year limited warranty on hull and 1-year on components. Warranty covers defects in materials and workmanship under normal use. For support, visit www.conradboats.com or contact 1-800-555-1234. Keep original receipt for warranty claims.